Cisco CCNA Certification Training

The Cisco CCNA Online Training Program will give you the essential knowledge to install, configure, and operate a small enterprise branch network, including basic network security
Temecula, CA P.O. Box 760,, Temecula, CA 92593
(951) 9723600

Course at a Glance

Mode of learning : Online - Instructor Lead(LVC)

Domain / Subject : Engineering & Technology

Function : Information Technology(IT)

Trainer name : Brock Stout and Tracey Rossi

Duration : 150 Hours

Difficulty : Medium

Cisco CCNA Certification Training

The Cisco CCNA Online Training Program will give you the essential knowledge to install, configure, and operate a small enterprise branch network, including basic network security. You’ll learn about routed and switched LAN Emulation networks made up of Cisco equipment while you prepare for Cisco certification. The program provides focused coverage of Cisco router and switch configuration procedures. Upon completion of this program students will be prepared to take 100-101 ICND1 and earn the CCENT, followed by 200-101 ICND2.  After passing ICND1 and ICND2 students will earn the CCNA Certification. Students can also finish the program and be prepared to take the 200-120 CCNA exam, which is a single exam that can result in the CCNA certification. This program will allow you to practice in virtual interactive lab environments.


Upon successful completion of this program, you’ll understand the following:

  • IP Data Networks: Network devices such as routers, switches, bridges and hubs; Identify common applications; OSI and TCP/IP models; Network media
  • LAN Switching Technologies: Determine media access control methods, Basic switching concepts; Configure switches, Ping, Telnet and SSH; VLANs; Trunking on Cisco switches.
  • IP addressing (IPv4/IPv6): Describe, identify and configure addresses for both IPv4 and IPv6
  • IP Routing Technologies: Routing concepts; Configure and verify routers with CLI; Static and default routes; Routing and routing protocols; OSPF, InterVLAN Routing; SVI interfaces.
  • IP Services: DHCP, ACLs, NAT and NTP
  • Network Device Security: Passwords, SSH, VTYs, physical security, disabling unused services and authentication; Switch Port Security features; Filter ACLs and limit telnet and SSH access.
  • LAN Switching Technologies: RSTP, PVSTP, Etherchannels; and PVSTP operation.
  • IP Routing Technologies: Cisco IOS router boot process; Configure a serial interface; Manage IOS files; Routing and routing protocols; OSPF and EIGRP.
  • IP Services: Recognize High Availability (FHRP) including VRRP, HSRP and GLBP; Syslog; SNMP v2 & v3.
  • Troubleshooting: Network Issues; VLAN problems; Trunking problems on switches; ACL issues; Netflow data; Spanning Tree operation issues; OSPF and EIGRP issues; InterVLAN routing problems; WAN implementation issues; NetFlow statistics; Etherchannel problems
  • WAN Technologies: Identify different WAN Technologies; WAN serial connections; PPP connections between Cisco routers; Frame Relay on Cisco routers; PPPoE
  • This program will prepare students to take the Cisco 200-120 CCNA Exam or the 100-101 ICND1 and 200-101 ICND2 exams.  These exams are not included in the cost of the program.


This program can be taken on a PC or a Mac. This program is compatible with the Windows XP and later operating systems and IE 7 and later browsers. High-speed Internet is recommended.

Remote Lab Requirements:

  • The PC must be connected to a high-speed Internet connection.
  • The PC must have pop-up blockers turned off.
  • The PC must not be located behind a caching proxy firewall.
  • The PC must have Java JRE version 1.6.0 or higher installed.

Certification Requirements

Cisco Certified Network Associate (CCNA) Routing and Switching is a certification program for entry-level network engineers that helps them maximize their investments in foundational networking knowledge and increase the value of their employer's networks. CCNA Routing and Switching is for Network Specialists, Network Administrators, and Network Support Engineers with 1-3 years of experience. The CCNA Routing and Switching validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.

Your tuition includes the following textbooks:

Cisco CCENT/CCNA ICD1 100-101 Official Cert Guide
Cisco CCNA Routing and Switching ICND2 200-101 Official Cert Guide


To enroll, we recommend that you have experience working in a network environment. If you do not have at least 1-3 years of networking experience, we highly recommend you take a course like CompTIA Network+ first. This program is for you if you want to learn the skills necessary to become Cisco CCNA certified.

All of our programs are self-paced and open enrollment, so you can start them when you want and finish them at your own pace.

Course Contents

CS-005 ICND1 100-101

  • Networking Fundamentals
    • TCP/IP Networking Model
    • OSI Networking Model
    • Fundamentals of Ethernet LANs
    • Fundamentals of WANs
    • Fundamentals of IPv4 Addressing and Routing
    • Fundamentals of TCP/IP Transport and Applications
  • Ethernet LANs and Switches
    • Building Ethernet LANs with Switches
    • Installing and Operating Cisco LAN Switches
    • Configuring Ethernet Switching
    • Implementing Ethernet Virtual LANs
    • Troubleshooting Ethernet LANs
  • IP Version 4 Addressing and Subnetting
    • Binary
    • Subnetting
    • Applying Subnets to Diagrams
  • Implementing IP Version 4
    • Operating Cisco Routers
    • Configuring IPv4 Addresses and Routes
    • Learning IPv4 Routes with OSPFv2
    • Configuring and Verifying Host Connectivity
    • Configuring Static Routes
    • Configuring DNS and DHCP
  • IPv4 Services
    • Basic IPv4 Access Control Lists
    • Advanced IPv4 ACLs and Device Security
    • Network Address Translation
  • IP Version 6
    • Fundamentals of IP Version 6
    • IPv6 Addressing and Subnetting
    • Implementing IPv6 Addressing on Routers
    • Implementing IPv6 Addressing on Hosts
    • Implementing IPv6 Routing

Outline – CS-006 ICND2 200-101

  • LAN Switching
    • Spanning Tree Protocol Concepts
    • Spanning Tree Protocol Implementation
    • Troubleshooting LAN Switching
  • IP Version 4 Routing
    • Troubleshooting IPv4 Networks
    • Creating Redundant First Hop Routers
    • Virtual Private Networks
  • IP Version 4 Routing Protocols
    • Implementing OSPF for IPv4
    • Implementing and Understanding EIGRP for IPv4
    • Troubleshooting IPv4 Networks
  • Wide Area Networks
    • Implementing Point-to-Point WANs
    • Understanding Frame Relay Concepts
    • Implementing Frame Relay
    • Identifying Other Types of WANs
  • IP Version 6
    • Troubleshooting IPv6
    • Implementing OSPF for IPv6
    • Implementing EIGRP for IPv6
  • Network Management
    • Managing Network Devices
    • Managing IOS Files
    • Managing IOS Licensing


Write Your Own Review

Write your review here (required)

Is the price of course overrated?
would you recommend this course to others?
Is duration of the course sufficient enough?
Did you like the faculties?
What would you prefer in future classroom or online learning?

Disclaimer: The contents of the course & Institute are obtained from the institute’s website by automated scraping or manual updates. For the latest information, please refer the institute website directly. For any discrepancies in the content, contact us at